New Items

Supply of ‘pipe and cable locator ’ as per attached brochure and data sheets;some of advance features are:-signal select for positive line identification-real time emf distortion alert-internal bluetooth and gps-offset vector locate mode-cloud based online data review-transverse plot screen-plan view screen-sonde locate screen-50 million internal data storage-data download in . Kml, . Csv, . Txt, . Shp, . Xls-soft carry kit bag-5” signal clamp

The OKO-3 GPR is a portable lightweight low-prices system designed for non-destructive environmental monitoring. The OKO-3 GPR includes the control unit and antennas. All antennas are interchangeable and meet the needs of a broad range of applications.
The control unit   is designed for control of all GPR operating modes. CU are manufactured in two types – one channel (one antenna unit can be connected) and two channel (possible to connect two antenna units)..
The control unit   receives notebooks’ orders via Ethernet interface or Wi-Fi channel, processes antenna units’ current set-up and send it via RS-422 interface to antenna unit, sends to antenna commands for operational mode, receives data from the antenna unit, arrange secondary data processing, transfers the data after processing to via Ethernet interface to notebook.

Cable route tracer kit for avoidance and tracing as per attached brochure and as here under comprising of :

-vscan rx with operting modes of power, radio,cp-100, freq. 33khz & 131 khz, data logging, compass, alerts, self site calibrtion, and users guide

-1 watt transmitter (signal geneator) with output lead,04 nos. X alkaline batteries ground rod

Monoblock (Antenna with central frequency of 400 MHz and control unit in one enclosure) with the odometer, the power supply unit 3,8/12, charging unit ZU-2, a hanger for labtop, shoulder belt system, handle-rod, software Geoscan 32, cables.

Monoblock (Antennas with central frequency of 250 MHz, 700 MHz and control unit in one enclosure), the odometer, power supply unit 3,8/12, charging unit ZU-2, a hanger for labtop, handle-rod, software Geoscan 32, cables.

The adventure began with the RS1D. The first of its kind personal seismograph and our original Raspberry Shake. Combining a professional-grade vertical seismometer (called a geophone) digitizer, hyper-damper and computer, it is an all-in-one highly portable solution for monitoring earthquakes and all types of ground motion activity.

It can detect powerful earthquakes originating on the other side of the planet, and all magnitudes of seismic activity in your local region that cause a vertical movement of the ground. All sorts of ground motion can be monitored from both man-made and natural activity including: traffic, fracking, explosions, eruptions, avalanches, landslides, earthquakes and more!

Our entry-level model, the RS1D is the most affordable electronic seismograph on the market. It not only incorporates professional hardware but also gives users access to a comprehensive and advanced ecosystem of in-house services and support. It is becoming increasingly popular as an educational tool for teaching STEM to all ages, K-12’s, University and beyond, with multiple programs using it worldwide.

All Raspberry Shake models are highly compatible, easily integrated into existing networks, and can be deployed rapidly. Find out what the experts are saying from multiple peer-reviewed articles about Raspberry Shakes.

For a side by side comparison of our devices to see which one is right for you.

3 Component Seismograph

• Advanced sensor capabilities for high quality seismic data across all axes
• Record up-down and side-to-side activity from local and distant ground motion
• Detect all magnitude local seismicity, and larger earthquakes from across the globe
• Our top of the line seismograph for incredible accuracy and data quality

This hardened enclosure will protect your unit against rainfall, dust and bugs. We call this an “IP67” enclosure, which means that it is IP67 rated – fully weather proof, dust tight and can withstand immersion (30 minutes at 1 meter).

Subsurface Utility Engineering (SUE) is the most common desired delivery method to the determination of the exact location of existing underground facilities. It is the non-destructive surface geophysical methods are then leveraged to determine the presence of subsurface utilities and to mark their horizontal position on the ground surface. Vacuumexcavation techniques are employed to expose and record the precise horizontal and vertical position of the assets.This information is then typically presented in CAD format or a GIS-compatible map. A conflict matrix is also created to evaluate and compare collected utility information with project plans, identify conflicts and propose solutions. The concept of GPR survey is gaining popularity worldwide as a framework to mitigate costs associated with project redesign and construction delays and to avoid risk and liability that can result from damagedunderground utilities.

CME-4211ND is a digital 3-component broadband seismometer. The rugged case includes a broadband seismometer and a 24-bit autonomous data acquisition system. 
With its small size and light weight, easiness in operation, mechanical reliability and low energy consumption, this seismometer can be an irreplaceable instrument for field geophysical surveys. While equipping permanent seismic stations, a reasonable price combined with recordings of broadband signals of long-distance earthquakes will be attractive. 
CME-4211ND is excellent for structural health monitoring as a part of timely or permanent deployment systems. In addition to the standard version designed for field surveys, the seismometer is also available for boreholes of over 108-mm diameter.

Keeping up with parameters of CME-6111, the CME-6211 model has a significantly lower sensitivity toward the atmospheric pressure and temperature variations in a lower frequency range. 
This model's sensors are equipped with a double-shielded isolation from unwanted external actions. 
The CME-6211 seismometer does not require mass centering or any other special techniques during installations. This model is designed for using mostly as a part of permanent seismic stations and is the most ultimate one among our seismometers.
The CME-6211 frequency characteristic with the poles and zeros presentation is available at the link on the website of Incorporated Research Institutions for Seismology (IRIS)

matchpointGPS gives complete tracking solution to control your vehicle entirely with some of the major benefits as:

• Real time location tracking which keeps an eye 24*7 on the vehicle

• Live Location updates within every 10 second for utmost safety

• Replay Route feature enables to access the speed, distance & time of the trip

• Real time notifications for Ignition On, Over Speeding, Boundary, Late Night Ignition & Excessive Idling at your fingertips

• Reports of last 90 days travel in Timeline format helps to evaluate the optimization

• 24/7 digital locker for all the documents of vehicle to access from anywhere, anytime

• Modes designed especially for customized notifications for Harlin:

1. Track Mode

2. Service Station Mode

3. Child Mode

4. Valet Mode

5. Self-Mode

6. Do Not Track Mode

• Features like Driver Assigning, Driver Documents & Driver Details are also available

• Multiuser configuration at no cost with the flexibility of giving full/limited access as per the users choice

• Scheduling service anytime & anywhere in India available for easy servicing

• Onsite installation & servicing available PAN India

• Free replacement warranty during the service tenure

• 24*7 Multilingual communication support for your convenience

• Missed Call Alert: Give a missed call on 022-6140-3660 and receive all the alerts on your phone immediately

• User interface available for Android, iOS & Web App.

MTSS-1033A-ND is a 3-component digital accelerometer made by R-sensors. 
The MTSS-1033A-ND accelerometer is designed to measure strong motion, to monitor and analyze industrial vibrations both as an accelerometer in seismic alarm systems and as a standalone instrument. 
Three identical compact sensitive elements with an electrodynamic force-balance feedback allow for a precision and high stability. This model is designed for input signals of up to ±3g and has a self-noise level of 130 ng/√Hz at 10 Hz. 

Application notes on using MTSS-1033A-ND to construct real-time monitoring systems for a bridge as an example.

The Leica iCON iCB70 construction manual total is ideal for different types of targets; reflectorless targets, prisms and reflective tapes. The integrated 4G modem allows mobile data transfer directly between the design office and the instrument on site to streamline dataflow and deliver results directly from the field.

The iCON iCB50 allows users to:

• Layout points and lines quickly and accurately
• Layout complex structures easily
• Quickly perform verticality checks on formwork and structures
• Complete fast and accurate as-built measurements

Working directly with digital design data on board of the instrument allows the operator to prepare and execute construction tasks faster, simpler and more accurately. Benefit from simplified stakeout and as-built tasks on the construction project and the ability to react quicker to changes and updates in the design.

The Leica iCON iCB70 construction manual total is ideal for different types of targets; reflectorless targets, prisms and reflective tapes. The integrated 4G modem allows mobile data transfer directly between the design office and the instrument on site to streamline dataflow and deliver results directly from the field.

The iCON iCB50 allows users to:

• Layout points and lines quickly and accurately
• Layout complex structures easily
• Quickly perform verticality checks on formwork and structures
• Complete fast and accurate as-built measurements

Working directly with digital design data on board of the instrument allows the operator to prepare and execute construction tasks faster, simpler and more accurately. Benefit from simplified stakeout and as-built tasks on the construction project and the ability to react quicker to changes and updates in the design.