GPS-GNSS Systems

Emlid Reach RX is a dual frequency Network Rover compatible with Survey of India CORS Network (SOI CORS).

Network RTK rover with centimeter accuracy

Pocket-sized and lightweight receiver. Works with NTRIP corrections.

RTK GNSS receiver
with tilt compensation
Survey grade precision,
even in hard-to-reach spots

The Arrow Gold RTK Eos GNSS Receiver is the first high-accuracy iOS, Android, and Windows Bluetooth GNSS receiver to implement all four global constellations (GPS, GLONASS, Galileo, BeiDou), three frequencies (L1, L2, L5) and satellite-based RTK augmentation. The Arrow Gold RTK GNSS works with all apps that run on iOS, Android, and Windows devices. It also supports all planned global satellite constellations as well as all planned signals, giving it an awesome return on investment that will serve you well into the next decade and beyond.

Introducing SafeRTK for Arrow Gold RTK GNSS Never lose an RTK connection again.

Theres nothing more frustrating than trying to stay connected to an RTK network somewhere with poor cell coverage. So what can you do?

Try SafeRTK, designed for areas with poor coverage on the Arrow Gold RTK GNSS receiver.

SafeRTK is a trademarked feature of the Arrow Gold. When your receiver loses RTK GNSS connection, for whatever reason, SafeRTK takes over. Within just a few seconds, SafeRTK is enabled, allowing you to maintain an RTK-level accuracy (i.e., cm) for up to 20 minutes while waiting for a reconnection. So you can save time and keep moving. There has never been a smoother RTK GNSS experience in the field.

Built-In 4-cm Accuracy without RTK*

No RTK network? No problem!

If you work in an area without an RTK network, you can still get RTK GNSS accuracy with the Arrow Gold, anywhere in the world. By using all four GNSS constellations and satellite signals, the Arrow Gold is able to generate RTK GNSS centimeter corrections in real time, with convergence times as low as 15 minutes. This makes the Arrow Gold RTK GNSS receiver one of the most powerful centimeter-grade GNSS receivers on the market, at one of the most affordable prices. It is a popular choice among Eos customers.

Usually autopilot triggers the camera and records the coordinate it has at that moment. When the drone is flying at 20 m/s and GPS works at 10 Hz, that means your autopilot will have position readings only each 4 m, which is not suitable for precise georeferencing. In addition, there is always a delay between the trigger and the actual moment the photo is taken.

Reach solves the problem of positioning by connecting directly to the camera hot shoe port, which is synced with the shutter. The time and coordinates of each photo are logged with a resolution of less than a microsecond. This method allows GCPs to be used only to check your accuracy.

Camera control

• Reach is able to trigger cameras as well as register events. The event mark feature is a must for aerial mapping as it allows the precise time when the shutter was activated to be registered.

Simple log management

• Logs are automatically recorded directly to RINEX in the internal memory. View a list of the logs and download them using the ReachView app.

Monitoring data

• ReachView shows current satellite levels, your location on a map, and much more.

NTRIP or another Reach as a base station

• To calculate centimeter-precise coordinates in PPK and RTK, Reach needs corrections from a base station. It could be either another Reach receiver or an NTRIP service. VRS is also supported.

Single Band UAV Mapping Kit

- Emlid RS+ Base - 1 (Qty)
- Emlid M+ - 1 (Qty)
- Emlid Tallysman Antenna- - 1 (Qty)
- Hot Shoe Adaptor - 1 (Qty)

For Work within Short Base lines, EMLID Single Band UAV Mapping Kit is an optimal Choice
Range offered :
RTK : upto 10 km
PPK : upto 20 km
Time to Fix : 1-2 min
*Rinex Logging Update Rate - upto 14 Hz

(*Special Conditions)

Features :

Is Compatible with Windows, Android and IOS

• Delivery Time: 1- 4 weeks
• Packaging Details: Reach RS+ Reach M+ Tallysman multi-GNSS Antenna Carry Case Radio Antenna Adapter for survey pole USB Cables JST-GH 6-pin to jumper pin cable JST-GH 5-pin to jumper pin cable

REACH RS2
Multi-band RTK GNSS receiver
with centimeter precision
For surveying, mapping and navigation.
Comes with a mobile app.
Gets fix
in seconds
Reach RS2 gets fixed solution in just seconds and maintains robust performance even in challenging conditions. Centimeter accuracy can be achieved on distances over 60 km in RTK, and 100 km in PPK mode.
GPS, GLONASS, BeiDou,
Galileo, QZSS and SBAS
L1OF, L2OF, L1C/A, L2C,
E1B/C, E5b, B1I B2I
PPP
support
RINEX raw data logs are compatible with OPUS, CSRS-PPP, AUSPOS, and other PPP services so you can now get centimeter-precise results in any place on Earth. Process RINEX files in an online service and get position with absolute accuracy.
 
Built-in
3.5G modem
Reach RS2 features a power-efficient 3.5G HSPA modem with 2G fallback and global coverage. Now corrections can be accessed or broadcasted over NTRIP independently, without relying on Internet connection on your phone.
22 hours
on 1 charge
Up to 22 hours of autonomous work when logging data and up to 16 hours as a 3G rover, even in cold weather—no more need to carry spare batteries with you. Reach RS2 can charge from a USB wall charger or a power bank over USB-C.

Emlid Reach RS2 set consists of:
Emlid Reach RS2 GNSS Receiver x 2
LoRA Antenna x 2
Tripod with Tribrach for Base x 1
GPS Pole with Tripod for Rover x 1

With PicPoint, you can easily measure points directly in the field that cannot be measured with conventional GNSS measurements, such as on façade points or objects with restricted access possibility.

PicPoint combines GNSS measurements with images taken from the PicPoint camera attached to the pole. The innovative X-PAD Field Software running on an Android tablet uses photogrammetric principles to enable a point determination, CAD drawings and various COGO calculations, such as area and tie distance. Of course measured points are visualised in the image allowing a visual completeness check of your survey directly on site. If you should ever have missed to measure some points, this can be done easily in the office.

Flexibile operations:

• PicPoint is suitable for all GeoMax GNSS, including Zenith15, Zenith25 Pro and Zenith35 Pro.

Ease of use:

• With a guided workflow, fully-integrated X-PAD software, and graphical view, PicPoint is easy to use even for beginners.

Robust device:

• PicPoint is waterproof, dustproof and shockproof.

Combined imagery:

• Combining measurements with images taken from the PicPoint camera attached to the pole, clearly see and understand all points.

The Reach RS2 is making the multi-band GNSS receivers affordable. Supporting multiple frequency bands, Reach RS2 fixes 10 times faster, works on longer baselines and supports PPP processing. Reach RS2 can also deliver centimeter accuracy in areas where Reach RS struggled: narrow city streets, forests, close to buildings and machinery.

Key Features

• Multiband GNSS – GPS/QZSS, GLONASS L1, L2; BeiDou B1, B2; Galileo E1, E5
• Integrated Long Range Radio – LoRa 865.867Mhz with range of up to 8Km
• Long Battery Life – 16 hours when being used a 3.5G RTK Rover (LiFePO4 battery, 6–40V input, USB charging)
• Integrated Wifi and Bluetooth for connection to other devices

Gets fix in seconds

• Reach RS2 gets fixed solution in just seconds and maintains robust performance even in challenging conditions. Centimeter accuracy can be achieved on distances over 60 km in RTK, and 100 km in PPK mode.

Emlid Reach RS2 RTK GNSS Receiver

• Reach RS2 gets fixed solution in just seconds and maintains robust performance even in challenging conditions. Centimeter accuracy can be achieved on distances up to 60 km in RTK, and 100 km in PPK mode.
• RINEX raw data logs are compatible with PPP services so you can now get centimeter-precise results in any place on Earth. Process RINEX files in an online service and get position with absolute accuracy.
• Reach RS2 features a power-efficient 3.5G HSPA modem with 2G fallback and global coverage. Now corrections can be accessed or broadcasted over NTRIP independently, without relying on Internet connection on your phone.
• Up to 22 hours of autonomous work when logging data and up to 16 hours as a 3G rover, even in cold weather—no more need to carry spare batteries with you. Reach RS2 can charge from a USB wall charger or a power bank over USB-C.
• Reach provides data in standard NMEA that is used by most GIS apps. Simply connect your device to Reach over Bluetooth or with a cable, and turn on “Position output” in ReachView.
• Reach is able turn on and off in sync with an external battery connected over RS-232. This helps when the power button is hard to reach. For example, if the receiver is placed on the roof of a tractor.
• Reach RS2 needs a base station as a source of corrections. That’s a requirement for centimeter accuracy in RTK and PPK. Base might be either another Reach RS2 receiver or NTRIP service. VRS is also supported. Reach RS2 works seamlessly with other Reach receivers over any link.

Free ReachView Surveying app

• The easiest to use software for data collection that is available both for Android and iOS. With ReachView, you can collect and stakeout points and control all the features of Reach receivers, such as setting up a base station, logging RINEX data, and configuring NMEA output.

Point collection:

• Create projects, save points, and export in industry standard formats
• Record each position as a point with centimeter precise coordinates. Export projects and open them in GIS or CAD software like AutoCAD, ArcGIS, QGIS, and others.

Stakeout:

• Stakeout is used to find exact physical locations of points. They can be collected in ReachView or imported from other CAD or GIS software. Process of stakeout in ReachView has two steps: map view and bulls-eye. Map’s purpose is to help you navigate to points on long distances. When you get closer than 40 cm to the point, bulls-eye turns on to make it easier for you to visually match receiver and point.

Logging in RINEX:

• Record raw data, position and base correction logs. Point collection and recording of RAW data are independent processes and can be used simultaneously. ReachView has a simple and intuitive interface for logging configuration and control.
• Reach RS2 gets fixed solution in just seconds and maintains robust performance even in challenging conditions. Centimeter accuracy can be achieved on distances up to 60 km in RTK, and 100 km in PPK mode.
• Up to 22 hours of autonomous work when logging data and up to 16 hours as a 3G rover, even in cold weather—no more need to carry spare batteries with you. Reach RS2 can charge from a USB wall charger or a power bank over USB-C.
• Reach provides data in standard NMEA that is used by most GIS apps. Simply connect your device to Reach over Bluetooth or with a cable, and turn on “Position output” in ReachView.
• Reach RS2 needs a base station as a source of corrections. That’s a requirement for centimeter accuracy in RTK and PPK. Base might be either another Reach RS2 receiver or NTRIP service. Reach RS2 works seamlessly with other Reach receivers over any link.

Reach RS is a rugged and versatile multi-GNSS RTK receiver with built-in IMU. It can provide coordinates down to centimetres in RTK mode. RTK mode requires a pair of receivers: one is stationary which provides corrections, another one moving which applies corrections and provides its precise coordinates. Reach has open-source RTK engine RTKLIB at its core and is controlled using cross-platform ReachView app. Thanks to large battery and built-in radio communication Reach RS is perfectly suited for field work.

Emlid Reach RS+ Set consists of:
Emlid Reach RS+ GNSS Receiver x 2
LoRA Antenna x 2
Panasonic FZ-B2 Rugged Controller x 1
Tripod with Tribrach for Base x 1
GPS Pole with Tripod for Rover x 1

The Zenith35 Pro is equipped with the latestNovAtel measurement engine, with 555 channelsmulti constellation and frequency support providingunmatched functionality. The unique Zenith35 ProTilt&Go functionality allows you to access theinaccessible, ensured by a precise electronic bubble. ItsWi-Fi connection offers the possibility to configure theZenith35 Pro from every device. With IP68, the Zenith35Pro Series is a compact and rugged tool that is water anddust proof.

The Zenith16 GNSS receiver is a cost-effective investment that guarantees reliable results. In combination with GeoMax field controllers and the X-PAD software, the receiver reaches its full potential.

Renowned partners:

• Experience increased productivity and reduced failure rates thanks to the power of Hexagon’s cutting-edge technology and the partnership with high-quality brands like SATEL and NovAtel.

Seamlessly integrated into your workflow:

• X-PAD Ultimate, the dedicated GeoMax field software, convinces with a perfect balance between clear structure, straight forward workflows and high functionality. Through close cooperation with key-users it is always kept up to date.
• The GeoMax software offering is completed by X-PAD Fusion. X-PAD Fusion has the versatility and flexibility to fuse all data types from both GeoMax sensors and other 3rd party sources such as drones.

Affordable price:

• Providing top-performing technology at an affordable price, the Zenith16 GNSS receiver convinces with a remarkable performance ratio.

Open & flexible configuration:

• The Zenith Manager, a stand-alone application available for Windows® and AndroidTM operating systems, enables you to configure your receiver without using the field controller.

Single Band UAV Mapping Kit

- Emlid RS2 Base - 1 (Qty)
- Emlid M2 - 1 (Qty)
- Emlid Multiband Antenna with Cable - 1 (Qty)
- Hot Shoe Adaptor - 1 (Qty)

Provides robust performace and quick installation, allowing work on long baselines

Range offered :
RTK : upto 60 km
PPK : upto 100 km
Time to Fix : 5 sec
*Rinex Logging Update Rate - upto 20 Hz

(*Special Conditions)

• Packaging Details: ¿¿¿ Reach RS2 ¿¿¿ Reach M2 ¿¿¿ Multi-band GNSS antenna ¿¿¿ M2 SMA antenna adapter cable 0.5m ¿¿¿ hot shoe adapter ¿¿¿ Radio antenna ¿¿¿ Carrying case with a strap ¿¿¿ USB Type-C cable ¿¿¿ JST-GH 6-pin to jumper pin cable ¿¿¿ JST-GH 5-pin to jumper pin cable

The Arrow 200 RTK GPS receiver was the first-ever RTK GNSS receiver capable of communicating with any Bluetooth^®-enabled mobile device. Simply put, this was a game changer. With the advent of the Arrow 200, it became possible to collect and manage survey-grade location data on any commercially available mobile device (e.g., iOS, Android, Windows). Thanks to the proliferation of the “bring your own device” (BYOD) market, and the explosion of RTK GPS/GNSS networks, the past several years have seen an increase in demand for centimeter-level accuracy. As a result, the Arrow 200 has become popular among location professionals in utilities, pipeline, environmental, marine, archaeological, and other industries.

All Satellites, All Signals with Arrow 200 RTK GPS

• The Arrow 200 supports all GNSS and SBAS constellations worldwide. And with dozens of satellite launches planned between now and 2020, the accuracy of the Arrow 200 will only get better.
• Because of patented technology, the Arrow 200 RTK GPS unit can transform free GNSS and SBAS signals into submeter-level location data. With support for RTK network and base-station connectivity, the Arrow 200 can provide 1 cm accuracy literally anywhere in the world — on any device, in real time, without post-processing. This level of performance, reliability, and accuracy places the Arrow 200 among the top-performing GNSS receivers in the world

Easy to Use

• With such a large selection of GNSS receivers, smart devices, and mobile apps to pick from, the task can seem daunting. The Arrow 200 separates itself by its ease of use. It takes just minutes to configure the Arrow 200 with any mobile device. High-accuracy data can then be collected within minutes. Moreover, location can be collected on virtually any field app. Eos recommends our partner field apps for the easiest user experience. But you can also pass GNSS metadata to your own app, using our guidelines. Because of its support for all satellite signals, all mobile devices, and all field apps, the Arrow 200 is the first truly future-proof GNSS receiver, able to work with any current or future technology.

RTK GNSS, and Atlas®, Support

• The Arrow 200 RTK GNSS receiver delivers 1 cm accuracy to any device when connected to an RTK network or base station. No RTK network? No problem! The Arrow 200 also supports Atlas®, a paid satellite subscription service that enables centimeter location accuracy in the world’s most remote areas. With Atlas®, the Arrow 200 can provide accuracy to within 10 cm anywhere in the world.

Equipped with NovAtel’s latest, cutting-edge measurement engine and supporting fast converging Precise Point Positioning (PPP), this antenna provides the highest level of technology and meets the toughest MIL standards. Zenith40 assures a workflow tailored to your needs thanks to the user-centered X-PAD Ultimate field software or the flexibility to run your own software on any field controller. The combination of all this in a GNSS smart antenna creates a solution that is second to none.

X-PAD:

• X-PAD Ultimate, the dedicated GeoMax field software, convinces with a perfect balance between clear structure, straight forward workflows and high functionality. Through close cooperation with key-users it is always kept up to date.
• The GeoMax software offering is completed by X-PAD Fusion, PAD Fusion has the versatility and flexibility to fuse all data types from both GeoMax sensors and other 3rd party sources such as drones.

Useful ad-on tools:

• The innovative and unique QR-iConnect functionality speeds up your connection process. Simply scan and go! Zenith40 can either be fully configured within the field software or with the Zenith Manager, a stand-alone application available for Windows and Android operating systems.

Superior Positioning:

• Struggles with canopy – like working under trees, or inaccurate results because of multipath signals are significantly improved due to the enhanced GeoMax Q-Lock Pro RTK which also reduces the time-to-fix. Also on board of the Zenith40, Hexagon’s TerraStar Precise Point Positioning (PPP) service that provides C-Pro correction data at centimetre level quality all around the globe.

Quality:

• Same as NovAtel and TerraStar, GeoMax is a full member of the renowned Swedish Hexagon group. Using synergies, sharing components combined with the power to partner with premium suppliers such as SATEL and bundled with Hexagons extensive manufacturing know-how enables GeoMax to offer products at highest performance and quality level.

The Arrow 100 submeter GPS receiver was designed specifically with GIS and mapping users in mind. This receiver squeezes more accuracy (submeter GNSS out of the box) from GNSS constellations and free SBAS corrections than any other receiver in the world. Thanks to its patented technology, you can use the Arrow 100 submeter GPS receiver under trees, around buildings, and in rugged terrain  where other receivers will fail to deliver. And thanks to real-time corrections processing in the field, you no longer have to spend time post-processing your data.

All Satellites & Signals

• When having GPS satellites is just not enough, the Arrow 100 submeter GNSS receiver steps in to provide at least 24 more satellites from the remaining global constellations (i.e., GLONASS, Galileo, BeiDou). When its all-constellation support is combined with free SBAS corrections (in most regions of the world), the Arrow 100 can provide 60 cm real-time accuracy.

Supports Every Device and App

• Thanks to Bluetooth technology, the Arrow 100 submeter GNSS receiver is able to work with any mobile device, including iOS, Android, Windows, and Windows Mobile. It can also work with any third-party or in-house data-collection app. Simply browse our listing of field app partners or contact us for the app library to enable high-accuracy location within your own app.

Reach M+ calculates real-time coordinate with centimeter accuracy and streams them in NMEA or binary format to your device over UART, Bluetooth or Wi-Fi.

PPK for UAV mapping

• Centimeter accuracy without GCP
• Reach module logs precise tracks and the exact moment when each photo is taken.
• Why camera synchronization is so important?
• Usually autopilot triggers the camera and records the coordinate it has at the moment.
• When the drone is flying at 20m/s and GPS works at 5Hz, that means your autopilot will have position readings only each 4m.
• While enough for navigation such readings are not suitable for precise georeferencing.
• Also, there is always a delay between the trigger and the actual moment the photo is taken.
• Reach module solves this by directly connecting to the camera hot shoe port which is synced to the shutter.
• The time of each photo is logged with a resolution of less than a microsecond.